Cylindrical wooden door stop with shock absorbing rubber o-ring. Screw fixation (screws included)


Door stop made of PEFC certified wood.

Screw fixation (screws included).

It incorporates the shock absorbing O-ring in beige-colour finish to make it more similar to beechwood.

Product measures (height x width x depth)
29x40x40 mm.

Logistic data


Dampens the impact of the door, protecting the wall.

The adhesive fixation is suitable for interior doors and smooth surfaces.

Screw fixation is recommended for solid or armoured doors.

Suitable for interior doors.


Screw fixation

Do not peel off the protective paper from the adhesive.

Mark the installation spot and drill a hole with a 6 mm bit to insert the plug.

Screw the double-headed self-tapping screw into the floor and then fasten the door stop.


Adhesive fixation

Clean with a cloth with alcohol the surface where the door stop will be fixed, then clean it with a dry cloth.

Peel off the protective paper from the adhesive.

Fix the door stop in the desired place and press it down firmly.

Tips and tricks

It is recommended that the door stop be set as far away from the hinges as possible.

For perfect fitting, use a pencil to mark a line on the floor with the inclination of the door where you will place the stop. Separate the door and the line will indicate the position.

It is advisable to fasten the door stop in the joints between floorings, without drilling them, so that if you decide to remove the door stop in the future, you can easily cover the hole with putty.