Wooden door stop with rubber shock absorber. Adhesive fixation or screw fixation (included).


Door stop made of PEFC certified wood.

Adhesive fixation or screw fixation (included).

Available in many wooden finishes.

Product measures (height x width x depth)
24x48x35 mm.

Logistic data


Prevents the door from hitting the wall. The rubber piece absorbs the impact while protecting the door.

The adhesive fixation is suitable for interior doors and smooth surfaces.

Screw fixation is recommended for solid or armoured doors.

Indoor use.


Screw fixation

Do not peel off the protective paper from the adhesive.

Mark the installation spot and drill a hole with a 6 mm bit to insert the plug.

Screw the double-headed self-tapping screw into the floor and then fasten the door stop.


Adhesive fixation

Clean with a cloth with alcohol the surface where the door stop will be fixed, then clean it with a dry cloth.

Peel off the protective paper from the adhesive.

Fix the door stop in the desired place and press it down firmly.

Tips and tricks

It is recommended that the door stop be set as far away from the hinges as possible.

For perfect fitting, use a pencil to mark a line on the floor with the inclination of the door where you will place the stop. Separate the door and the line will indicate the position.

It is advisable to fasten the door stop in the joints between floorings, without drilling them, so that if you decide to remove the door stop in the future, you can easily cover the hole with putty.