Door stop made of high quality sturdy stainless steel, which provides great resistance and durability.

Specially designed for heavy or large doors.

Screw fixation (screws included).

Dampens the door impact while protecting the wall.

Suitable for sturdy or armoured interior doors.

Place the supplied axis in the hole located at the door stop base to work as a balancer.

Using a 4 mm diameter drill bit, make a hole in the floor, place the door stop with the balancer inside the hole and align the stop with the door, so that the rubber part comes into contact and is aligned with the door.

Now use a pencil to mark the exact spot where to make the second hole.

Remove the door stop and, with an 8 mm drill bit, make the hole and then place the supplied plug.

Lastly, set the door stop in place and screw it on.

It is recommended that the door stop be set as far away from the hinges as possible.

It is advisable to fasten the door stop in the joints between floorings, without drilling them, so that if you decide to remove the door stop in the future, you can easily cover the hole with putty.