Thick foam to dampen and silence the door blow.

Adhesive bonding.

It dampens, absorbs and silences the impact of the door, protecting the wall.

Suitable for interior doors.

Clean with a cloth with alcohol the surface where the door stop will be fixed, then clean it with a dry cloth.

Peel off the protective paper from the adhesive.

Fix the door stop in the desired place and press it down firmly.

Maximum adhesiveness will be achieved after 24 hours.

It is recommended that the door stop be set as far away from the hinges as possible.

For perfect fitting, use a pencil to mark a line on the floor with the inclination of the door where you will place the stop. Separate the door and the line will indicate the position.