Neodymium magnet, much more powerful than conventional magnets. Taller than other catches for doors that are not completely flush with the floor. The design is optimized so that the transparent model is as discreet as possible, with transparent adhesive. In addition, the geometry of the housing conceals the magnet itself. The magnet has slight movement, allowing it to adapt to the metal plate on the door in case the floor is not perfectly level.

Hold and keep a door open.
Prevent unexpected door slams.
Indoor use.

Clean the floor surface where the door stop will be placed and the door surface where the metal plate will be attached using a cloth with alcohol.
Without removing any of the protective adhesive liners, fix the plate to the magnet, position the set on the floor, and bring the door closer, making sure the plate does not protrude from the bottom of the door.
Remove the protective liner from the stop’s adhesive and, to ensure proper positioning, slide the stop and plate assembly along the door until it touches the floor and press firmly.
Then remove the protective liner from the plate and bring the door closer until it makes contact with the adhesive and press firmly.

It is recommended to fix the catch as far away from the hinges as possible. It is advisable to wait 24 hours before use so that the adhesive reaches its maximum performance.