Very robust door retainer, designed for very heavy and large doors.

For installation in solid doors.

Made of zamak alloy.

Screw fixation (screws included).

Retaining and keeping a door open.

Preventing unexpected door slams.

Place the door retainer in the desired position and mark the retaining mechanism with a pencil placing it against the door.

Take the circular magnet and make it fit into the mark mentioned above.

Screw it into the door.

Put the door retainer back in the desired position and mark the position of the fixing holes with a pencil.

With a Ø5 mm drill bit, make the holes previously marked.

Screw the door retainer into the desired position.

It is recommended that the door retainer be placed as far away from the door hinges as possible to avoid leverage effect.

It is recommended that the floor fixing holes be made in the joint between two floor tiles if possible, to prevent it from being marked and so that if the door stop is removed the hole can be easily covered.