PTFE (polytetrafluoroethylene) sliding gliders, adhesive/screws/clove fixation. Top quality gliders, besides being excellent for moving furniture and electrical appliances, they guarantee maximum protection for all types of surfaces.

PTFE glider.

Top quality material.

Suitable for all types of surfaces.

Adhesive fixation or screw depending on the model.

Gliders that cover the ends of the legs of chairs, tables and other furniture.

They protect the floor from scratches or scuffs.

They reduce noise when moving furniture They allow furniture or electrical appliances to be moved easily.

Adhesive models

Clean the surface on which the glider is to be installed with a cloth moistened with alcohol.

Peel off the protective paper from the adhesive.

Press the glider hard so that it sticks well.

Models with screw

Using a Ø3 mm drill bit, make a hole in the centre of the marked leg.

Place the screw on the glider and screw it into the hole.

Models with integrated nail

Using a Ø1.5 mm drill bit, make a hole in the centre of the marked leg.

Using a hammer, tap the centre of the glider to introduce it into the hole.

Nail fixation models -> Special attention during installation: do not nail the glider directly to the leg with the hammer. Follow installation instructions.