Tempered steel clamp with non-slip brace.

Counts with a cosmetic cover.

Suitable for cleaning tools with Ø20-26 mm handles.

Adhesive fixation and optional fixing with Ø5 mm screws (not included).

Maximum weight supported: 1 kg.

Ideal for organising cleaning tools such as brooms, mops, etc...

Adhesive bonding

Apply to smooth surfaces free from dust and grease. Fixing to porous surfaces or LSE coatings may reduce the adhesive performance.

Clean the installation spot with alcohol.

Peel off the protective paper from the adhesive.

Affix and press the hook onto the surface.

 

Fixation with screws

Remove the decorative fairing from the hook.

Using the holes located on the base of the hook as a template, mark the desired position on the surface with a pencil.

Use a 5 mm bit to make the holes, place the fixing plugs and fix the hook using a pair of screws.

Snap-on the decorative fairing.

It is advisable to wait 24 hours before usage for the adhesive to achieve maximum performance. For loads over 1 kg or installation on irregular surfaces it is advisable to fix it with screws.