Optional fixation with screws (not included), which remain concealed by the front cover.
Maximum weight supported: 2 kg.
Apply to smooth surfaces free from dust and grease. Fixing to porous surfaces or LSE coatings may reduce the adhesive performance.
Clean the installation spot with alcohol.
Peel off the protective paper from the adhesive.
Affix and press the hook onto the surface.
Maximum adhesiveness will be achieved after 24 hours.
Remove the hook cover by pressing on the tab at the back.
Fix the hook with the screws (not included) and place the cover again by first fitting it in from below and then pressing it down from above.